Aerial
Lemco Econo Block
Lemco Econo Block M1070-1R. The 'V-notch' of this sturdy block wedges on the strand for new build construction or two .750" cables fit between the frame and retaining pin for overlash jobs. The steel gate retains the cable being pulled out. The rubber roller of the M-1070-1R supports a cable up to 1½".
Lemco Cable Block
Lemco Cable Block w/ Aluminum Roller Lemco M593 aluminum roller. This versatile block locks on 1⁄4” strand or fits over a 2¾” package of previously lashed cables. The frame will not snag loose lashing wire.
Lemco Cable Block
Lemco Cable Block w/ Aluminum Roller Lemco M593R rubber roller. This versatile block locks on 1⁄4” strand or fits over a 2¾” package of previously lashed cables. The frame will not snag loose lashing wire.
Lemco Overlash Nylon Roller
Lemco L0790P. This lightweight block is used to support up to 1” diameter cable during pull-out. The A-frame block fits over existing cable up to 2¼” in diameter. The frame is made of hardened and tempered spring steel
Loop Forming Tool
Loop Forming Tool 3206 Lemco 3206. Easy-grip pawl ensures positive engagement into gear rack. Bronze bushings provide smooth operability and prevent galling. Frame and gear rack are attached with a reinforcement plate to withstand pressure when forming dual trunk cables. Synthetic shoes driven by vertical gear rack form loop.
Loop Forming Tool
M-Series Loop Forming Tool LEM M3195 Lemco M3195. Easy-grip pawl ensures positive engagement into gear rack. Bronze bushings provide smooth operability and prevent galling. Frame and gear rack are attached with a reinforcement plate to withstand pressure when forming dual trunk cables. Synthetic shoes driven by vertical gear rack form loop.
Lemco Mullen Bender
Lemco Mullen Bender # M100 Lemco M100. Used to form the standard 12” flat bottom loop in small diameter cables, the tool is molded of resilient plastic. Universal ‘V-groove’ hand forming tool is recommended for .412, .500, .500MC2, .540 and .565 cable diameters only.
Lemco Mullen Bender
Lemco Mullen Bender LEM M200 Lemco M200. Used to form the standard 12” flat bottom loop in small diameter cables, the tool is molded of resilient plastic. Universal ‘V-groove’ hand forming tool is recommended for .412, .500, .500MC2, .540 and .565 cable diameters only.
Lemco Cable Chute
Lemco Cable Chute # S1059 Lemco S1059. The Chute guides the cable from the trailer into the path of the strand. The cast aluminum shoe features a UHMW friction-free wear strip. The zinc plated steel suspension hardware pivots freely under a three-bolt clamp (not provided) to compensate for trailer/ strand misalignment. Wt. 11 lbs.
Lemco Set Up Bracket
Lemco Set Up Bracket # F110 Used with a 45° corner block, cable is supported as it comes off the reel and follows the path of the strand. The bracket is fabricated of 5/16" x 2" structural hot-rolled steel. The design is such that the bracket swivels freely under the strand clamp (not provided) effectively compensating for situations where the trailer cannot be set in line with the path of the strand.
Lemco Rubber Wheel Chocks
Lemco Rubber Wheel Chocks Made of tough rubber compound and textile cord for maximum wear. A steel eye is provided to attach rope or chain. Positive chocking is a safety must.
Lemco 24" Shotgun
Lemco 24 Lemco SG24. Used to push cable blocks along strand up to 9⁄16” in diameter during lashing operations. Shotguns are fabricated of a steel tube and bearing flanges. Lock-pins retain the pusher to the strand.
Lemco Collapsible Cable Caddy
Collapsible Cable Caddy This collapsible frame folds flat for storage. There are no release buttons or chains. This fully automatic feature allows you to easily pickup and place the caddy with just one hand.
Lemco Overlash Cable Puller
Lemco Overlash Cable Puller This unit is designed to pull out up to four cables and works on packages up to 2 3/4" in diameter. Opposing roller arms retain the puller to the existing cable and offer quick pole transfer. Polyurethane rollers fitted with bronze bearings yield high mileage production. The steel frame is protected by a black polyester powder coat.
Lemco Reel Buck
Lemco Reel Buck The Reel Buck is 35" high, 64" long and has a capacity of 850 lbs. A quick, easy and economical way to set up 18" and 22" strand reels and cable reels up to 54" in diameter.The foot and handle design holds the main frame up and away from irregular surfaces. The rugged steel tubing makes the Reel Buck tough enough for the construction site.
Lemco Cable Puller
Lemco Cable Puller Lemco PR965. This Puller is used to pull out cable prior to the lashing operation. The main body of the Puller is a rugged one-piece aluminum casting.Two hardened steel rollers are provided to ride on either 5/16" or 1/4" strand.

Order

Contact Us

California Office
1-800-256-5186
Georgia Office
1-888-800-1712




Lasher Repairs


A-Aerial specializes in cable lasher repairs and servicing. Two day emergency service is available. We also accept you’re dropped or damaged lasher as a trade-in toward a new unit. When sending lashers to us for repair, please include contact information and description of requested repair.

C lasher rebuild cost usally range from $1600.00 to $2400.00.

J2 lasher rebuild cost usually range from $1,800 to $2,600.

Refurbished Lashers


We sell used and refurbished cable lashers. All used and refurbished lashers have a 90 day warranty.

Used C lashers from $2,195

Refurbished C lashers from $2,595

Refurbished J2 Lashers from 3,450.00

Refurbished J2B (Modified with no strand lock.) Lashers from 3,250.00